Skip to main content

How To Enter DFU Mode



For iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone 11, iPhone 11 Pro :  

- Connect the device to a computer using a USB cable.

- Quick-press the Volume Up button

- Quick-press the Volume Down button

- Hold down the Side button until the screen goes black, then hold down both the Side button and      Volume Down button.

- After 5 seconds, release the Side button while continuing to hold down the Volume Down button.

-If the Apple logo appears, the Side button was held down for too long.

- Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode.

- If your device shows a screen telling you to connect the device to iTunes, retry these steps.


For iPhone 7 and iPhone 7 Plus :

- Connect the device to a computer using a USB cable.

- Hold down both the Side button and Volume Down button.

- After 8 seconds, release the Side button while continuing to hold down the Volume Down button.

- If the Apple logo appears, the Side button was held down for too long.

- Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode.

- If your device shows a screen telling you to connect the device to iTunes, retry these steps.


For iPad, iPhone 6s and below, iPhone SE and iPod touch :

- Connect the device to a computer using a USB cable.

- Hold down both the Home button and Lock button.

- After 8 seconds, release the Lock button while continuing to hold down the Home button.

- If the Apple logo appears, the Lock button was held down for too long.

- Nothing will be displayed on the screen when the device is in DFU mode. If open, iTunes will alert you that a device was detected in recovery mode.

- If your device shows a screen telling you to connect the device to iTunes, retry these steps

Good Luck

Comments

Post a Comment

Popular posts from this blog

How To Flash Your Iphone

 To flash your Iphone Device you Must :  1 - Download 3uTools software using the link below :   https://url.3u.com/zmAJjyaa 2 - Install The Software As Follow :  Open the Software file downloaded     Select I agree to EULA and then Press Install    Wait for the installation to end   Press Launch and you are good to go   If you have Itunes installed on your Computer It will be like the picture above, otherwise, it will ask you to download it from inside the 3uTools automatically. Now Connect Your Device Using Type C Cable  Click On Flash And JB Go to Firmware and select your device type ( Iphone, Ipad ... ) and your device model ( Iphone 6, Iphone 7 plus ... ) Download the Firmware you want and then go to Pro Flash - Use Quick Flash Mode To Erase All Data - Use Retain User Data To Keep All Data Click on Import Firmware and select the one you downloaded Get Your Device Into DFU Mode If you don't know how then check out the link below ...
Post a Comment
Read more